Wood moisture content and why it matters
The wood looks dry. The bark is grey and the ends are cracked. But it hisses in the firebox and the oven won't climb past lukewarm. The likely cause is hidden water, and the number that describes it is moisture content.
What the number means
Moisture content is the amount of water in the wood, shown as a percentage. A higher number means a wetter log.
Fresh wood is very wet. A log straight from the tree can start at 80 percent or above, depending on species1. After seasoning, typical firewood has 20 percent or less2.
What the official figure is
The US Environmental Protection Agency says wood burns best at a moisture content of less than 20 percent3. It also says to test wood with a moisture meter before you burn it3.
Two notes on that. The agency's Burn Wise pages were written for home wood-burning appliances, not pizza ovens, and the program is now a historic record. The figure is about how wood burns, though. Your oven's manual comes first if it gives its own limit.
Why wetter wood performs worse
The reason is simple. The higher the moisture content, the more energy it takes to boil the water out before the wood will burn2. That energy comes out of your fire.
One source compares two cases. Green wood with 65 percent moisture holds less usable energy than the same wood dried to 20 percent2. Another says the energy content improves as moisture content falls4.
For an oven that means a longer wait for heat, and more fuel for the same result. The agency also gives a plain instruction: do not burn wet or green wood3.
How low can wood go?
Not to zero. In most parts of the United States the lowest moisture content normally reached by air drying is about 12 to 15 percent1. So a reading in that range simply shows wood dried about as far as air can take it.
Kiln drying is a faster process, but the sources here don't give a figure for it. See seasoned versus kiln-dried wood.
A quick way to think about your wood
| Reading | What it suggests |
|---|---|
| Above 20% | Wetter than the EPA's figure3 |
| Under 20% | Meets the EPA's figure for burning best3 |
| 12% to 15% | Near the usual lowest point for air drying1 |
Readings from a meter are approximate. The meter guide covers how to take them.
If your wood is too wet
- Stop burning it, because wet wood wastes heat. The agency says not to burn wet or green wood3.
- Split it smaller if it's in big rounds, since splitting exposes more surface to the air2.
- Stack it outdoors, off the ground, with only the top covered3.
- Be patient. Six months is the agency's minimum for seasoning3.
Whatever the wood, keep the oven outside in open air. A wood fire makes carbon monoxide, which can kill in enclosed spaces.
Reference list
- Moisture meter, Wikipedia
- Firewood, Wikipedia
- Best Wood-Burning Practices, US Environmental Protection Agency (archived Burn Wise program)
- Wood fuel, Wikipedia