Checking firewood moisture with a meter
The log feels dry, and it still spits and smokes. Your eyes and hands can be wrong. A moisture meter gives you a number, and the US Environmental Protection Agency tells wood burners to test wood with one before burning it1.
What the meter is measuring
A moisture meter gives a reading of the approximate moisture content of wood2. That one word, approximate, matters. Treat the figure as a good guide, not a lab result.
The agency's figure for best burning is a moisture content under 20 percent1. That's the line you're checking against. If you want the background first, moisture content is covered on its own.
Two kinds of meter
For typical woodworking, two basic types of meter are available2.
Pin-type
A pin-type meter has two pin electrodes that are driven into the wood fibres. They measure electrical resistance or conductivity2. The idea behind it is that water freely conducts electricity, so more water in the wood means more conductance2.
Pad-type
A pad-type meter doesn't need pins. Its two rubber pads are pressed into the wood, and it needs only surface contact to give a reading2. It works from the electrical properties of the wood, much as the pin type does2.
| Feature | Pin-type | Pad-type |
|---|---|---|
| Touches the wood with | Two metal pins driven in | Two rubber pads pressed on |
| What it measures | Resistance or conductivity | Electrical properties of the wood |
| Contact | Goes into the wood | Surface contact only |
The table comes from the meter source2.
Why your meter might disagree with another
Each brand of meter uses its own calculations, and then shows moisture content as a percentage2. Two meters can show slightly different numbers for the same split. Pick one, learn its habits, and check its instruction sheet for the right way to use it on firewood.
This page doesn't give meter-specific steps, such as pin depth or which face of the log to test. Those come from the maker of your meter.
What to do with the reading
- Take readings from several splits in the stack, not just one. A single piece can mislead.
- Compare each reading with 20 percent. Under it matches the EPA's figure for wood that burns best1.
- Set aside anything over it, and give it more time stacked outdoors.
- Remember that smaller splits dry faster. Splitting exposes more surface area3.
Before you have a meter
The agency also gives clues you can see and hear. Seasoned wood is darker and lighter, and it rings hollow against another piece1. Use that as a rough first pass only. It isn't a number.
A note on safety
Test the wood before you light the oven. Carbon monoxide from a wood fire can kill, so the oven stays outdoors in open air. Follow your oven's manual for the rest.
Reference list
- Best Wood-Burning Practices, US Environmental Protection Agency (archived Burn Wise program)
- Moisture meter, Wikipedia
- Firewood, Wikipedia